Range Rover Classic Digital Dash (Hard Dash & Soft Dash)
$5,400.00 AUD
Factory-Fit Digital Dash Replacement for Range Rover Classic
A vehicle-specific screen and surround designed as a true factory-fit replacement for the Range Rover Classic.
This kit replaces the original instrument cluster with a modern digital display, while retaining a clean, factory-style appearance. The screen is housed in a vehicle-specific surround that bolts into the original dash locations with no cutting or trimming required.
Built around the Haltech UC-10 display, supplied pre-configured with our Range Rover Classic layouts and ready to integrate into a modern ECU setup.
What’s included
Digital display supplied pre-programmed and ready to configure with your ECU
Vehicle-specific dash surround designed from 3D scans of an original Range Rover Classic dash, printed in PA11 Nylon with a lightly textured, factory-style appearance
Suitable for Hard Dash and Soft Dash vehicles
Four custom screen layouts included
Two classic designs inspired by the original Range Rover Classic instruments
Two modern designs with contemporary digital data presentation
Optional add-ons
Reverse camera kit — Haltech-compatible camera supplied with a dedicated harness and a powder-coated aluminium number-plate mounting bracket
Ambient air temperature sensor — Motion Raceworks external ambient air temp sensor for live display on the dash
The base kit can be run on its own or configured with either option, or both, depending on your setup.
Material & finish
Printed in PA11 Nylon. PA11 Nylon has a lightly textured surface, similar in look and feel to the textured moulded plastic used in vehicle interiors. We use these mounts as supplied in our own vehicles, installing them directly out of the box.
Rear mount printing note
Some light warping of the rear mounting section behind the screen is common due to the large, flat shape during printing. This generally has no impact on screen performance once everything is screwed into place and the mount is under tension.
Fit & appearance
The surround is designed as a direct replacement for the factory binnacle. It installs using the original mounting locations and sits correctly within the dash opening, maintaining original proportions and sightlines.
Direct bolt-in fit using factory dash locations
No cutting or trimming required
OEM-inspired shape and finish
Installed in our Classic: modern data in the factory instrument position.
ECU compatibility & wiring
The screen is designed to integrate with modern aftermarket ECUs via CAN bus. It works seamlessly with our EFI and ECU kits, which are based on the Haltech platform.
If your vehicle is still running a factory ECU, the display can be configured to work with the appropriate inputs. This configuration is completed by the installer and is not supplied as a pre-configured factory ECU solution.
A fully terminated harness and all required Deutsch connectors are supplied. Final vehicle-side connections (such as indicators, high beam, and brake warning) are completed at the customer’s end.
We provide full installation documentation, including wiring pinouts and references to the relevant Haltech software for configuration. An auto-electrician familiar with Haltech systems is recommended for installation.
Lead time
Made to order. Please allow approximately 2–6 weeks for production and dispatch.
Frequently Asked Questions
Does it fit Hard Dash and Soft Dash Classics?
Yes, choose the correct surround. It mounts in the original instrument position without cutting or trimming the dash. Send photos of your existing binnacle if you are unsure which option you need.
Do I need your EFI kit to use the dash?
No. It is a separate package for compatible ECU/input configurations. It integrates with our Nexus R3 EFI kit through CAN. If you retain a factory ECU or another aftermarket ECU, confirm the model, CAN protocol and available inputs with us before ordering. Factory ECU operation is not a supplied preconfigured solution.
What does preconfigured mean?
Our custom layouts are loaded. Your installer still connects vehicle inputs, configures ECU/CAN data and verifies calibration and warnings. A printed surround and loaded screens do not make the entire vehicle installation plug-and-play.
How many screen designs are included?
Four custom layouts: two classic designs and two modern designs, created by Regal Rover Classics.
What is included and what is optional?
The base package includes the Haltech UC-10, PA11 Nylon vehicle-specific surround, terminated harness and Deutsch connectors. Reverse camera and ambient temperature sensor are selectable extras. Choose neither, either or both in the product options.
How do speed, fuel level and other data work?
Data requires the appropriate ECU/CAN stream or wired sensor inputs. Your installer confirms speed source, fuel-sender setup and warnings, then calibrates and tests them. GPS speed and tyre-pressure monitoring need suitable additional hardware and configuration; they are not included in the listed base package. Contact us to confirm options.
Who should install it?
We strongly recommend a Haltech specialist familiar with display configuration, CAN and vehicle wiring. They complete vehicle-side connections and verify speed, warnings and essential functions. Adding a display alone does not require an engine tune; changing engine management does.
How long will it take?
Made to order, with an estimated 2–6 weeks for production and dispatch. Freight time is additional.
Can you supply a dash for a Morgan, TVR or another Rover V8 build?
Send your vehicle, ECU and dash-opening dimensions or photos. A compatible Haltech display may be possible, but this listing’s surround is specifically for the Range Rover Classic.
Choose your dash configuration above. Unsure about your ECU or binnacle? Send photos and ECU details so we can confirm the package.
Important Product Information
Installation & setup: We strongly recommend a Haltech specialist for installation and configuration. Confirm ECU/CAN compatibility before ordering. Your installer must verify wiring, speed calibration, warning lamps and required inputs. A camera is a viewing aid, not a substitute for direct observation.
Intended use: Haltech equipment is subject to its off-road/competition usage policy. Confirm any applicable regulatory exemption and local road-use, emissions and engineering requirements before purchase. This kit is not a road-use approval.
Responsibility: To the extent permitted by law, Regal Rover Classics does not accept responsibility for damage or costs caused by incorrect installation, wiring, configuration, tuning, misuse or use outside the specified application. This does not exclude liability for product defects or our own acts or omissions.
Consumer rights: Nothing in this listing excludes, restricts or modifies your rights under Australian Consumer Law or other applicable consumer laws.
